Rapid Impact Compaction models are HC04, HC08, HC12, HC16, HC20, HC36, HC42, HC60, HC84, HC150, of which HC36 and HC42 Rapid Impact Compaction use more, the specific technical parameters in the following figure for everyone to show, when choosing can refer to the table in the following figure, some of the parameters show more detailed, want to know more detailed parameters can be private message me.

Rapid Impact Compaction needs to be driven by excavators and loaders, the above chart does not show the model of suitable excavator and loader, then the following is a simple introduction to the various types of hydraulic tamping machines should be equipped with how large excavators and loaders.

HC04 and HC08 working pressure is 16Mpa, working flow ~110L/min, can be adapted to 7-13t excavator or 1-2t loader; HC12 and HC16 Rapid Impact Compaction working pressure 16Mpa, working flow ~130L/min, with 18-30t excavator or 3-4t loader; HC20 working pressure 16Mpa, working flow ~130L/min, suitable for 25-36t excavator or 4-5t loader; HC36/HC42 working pressure is also 16Mpa, working flow ~160L/min, using 30-40t excavator or 5-6t loader bearing drive; HC60 working pressure 21Mpa, working flow ~350L/min, with 36-49t excavator or more than 8t loader; HC84 Rapid Impact Compaction working pressure of 21Mpa, working flow ~350L/min, suitable for 40-60t excavator or more than 12t loader; HC150 working pressure 32Mpa, working flow ~600L/min, suitable for more than 70t excavator or more than 49t excavator to change the arm.

HC series Rapid Impact Compaction can be used with various brands of excavators or loaders on the market, the installation is very simple, the operation is convenient, and the after-sales staff will also come to the door to install and debug after purchase, so there is no need to consider how to install and other issues.

HC series Rapid Impact Compaction effective depth can reach up to 10m, the minimum is 0.4m, in the subgrade filling construction, the use of more is the HC36 high-speed hydraulic tamping machine, there are also a small part of the use of HC42. HC series Rapid Impact Compaction has 3 tamping gears, suitable for PLC remote control of tamping strength and frequency. After testing, after using 3 gears and 9 hammers to reinforce the bridge back transition area with 96% compaction, the settlement near the abutment is greater than 100mm, most of which is 150~250mm, some are about 300mm, the settlement of the normal crushing area is mostly about 100mm, the sedimentation of the heavy earth truck repeatedly rolling the part is 20~60mm, after the normal layered filling of the high-filled roadbed, the settlement amount of 120~180mm per 2m reinforcing settlement is 120~180mm, and the old roadbed of the widened road is excavated and reinforced after crushing, and the average settlement is 200~250mm According to the above test data, we can choose the appropriate high-speed hydraulic tamping machine.

All in all, the Rapid Impact Compaction has a wide range of models and can be applied to various large and small projects. In the choice, or to the actual construction requirements, to choose the right Rapid Impact Compaction machine, if you do not know how to choose, you can private message, for you to recommend a suitable Rapid Impact Compaction machine.